top of page

Affiliate Marketing

Public·160 members
Adam Kim
Adam Kim

How to Fix Huawei Y3 2018 CAG-L22 with Hang Logo or Dead Recovery Issues


How to Fix Huawei Y3 2018 CAG-L22 with Hang Logo or Dead Recovery Issues




If you own a Huawei Y3 2018 CAG-L22 smartphone and you are experiencing problems such as hang logo, dead recovery, bootloop, or IMEI issue, you may need to flash the stock firmware on your device. Flashing the stock firmware can help you restore your phone to its original state and fix any software issues that may be causing the problem.




Huawei CAG-L22 Flash File Y3 2018 MT6737m Hang Logo Dead Recovery Care File Sp Tools



In this article, we will show you how to download and install the Huawei Y3 2018 CAG-L22 flash file using SP Flash Tool. SP Flash Tool is a software that allows you to flash custom or stock ROMs on MediaTek devices. Before you proceed, make sure you have a backup of your important data, as flashing will erase everything on your phone. Also, make sure you have a charged battery and a USB cable to connect your phone to your computer.


Download Huawei Y3 2018 CAG-L22 Flash File




The first step is to download the Huawei Y3 2018 CAG-L22 flash file from the link below. The flash file is a zip file that contains the firmware, the scatter file, and the driver. The firmware is the software that runs on your phone, the scatter file is a text file that tells SP Flash Tool how to partition your phone's memory, and the driver is a software that helps your computer recognize your phone.


Download link: https://firmwarefile.com/huawei-y3-2018-cag-l22


Install Huawei Y3 2018 CAG-L22 Driver




The next step is to install the Huawei Y3 2018 CAG-L22 driver on your computer. The driver will allow your computer to communicate with your phone and perform the flashing process. To install the driver, follow these steps:


  • Extract the zip file you downloaded in the previous step.



  • Open the extracted folder and look for a file named Driver.exe.



  • Double-click on the Driver.exe file and follow the instructions on the screen to install the driver.



  • Restart your computer after the installation is complete.



Flash Huawei Y3 2018 CAG-L22 Firmware




The final step is to flash the Huawei Y3 2018 CAG-L22 firmware using SP Flash Tool. SP Flash Tool is a software that allows you to flash custom or stock ROMs on MediaTek devices. To flash the firmware, follow these steps:


  • Extract the zip file you downloaded in the first step.



  • Open the extracted folder and look for a file named SP_Flash_Tool.exe.



  • Double-click on the SP_Flash_Tool.exe file to launch SP Flash Tool.



  • Click on the Download tab in SP Flash Tool.



  • Click on the Choose button next to Scatter-loading File and browse to the extracted folder.



  • Select the MT6737M_Android_scatter.txt file and click Open.



  • Make sure all the boxes are checked in SP Flash Tool.



  • Click on the Download button in SP Flash Tool.



  • Turn off your phone and remove the battery (if removable).



  • Connect your phone to your computer using a USB cable while holding down the Volume Down or Volume Up button (depending on your phone model).



  • SP Flash Tool will detect your phone and start flashing the firmware.



  • Wait for the flashing process to complete. You will see a green tick mark when it is done.



  • Disconnect your phone from your computer and insert the battery (if removable).



  • Turn on your phone and enjoy!



Congratulations! You have successfully flashed the Huawei Y3 2018 CAG-L22 flash file on your phone. You should now be able to use your phone without any problems. If you have any questions or issues, feel free to leave a comment below. e0e6b7cb5c


About

Our Affiliate forum is one of the best ways affiliates can d...

Members

  • Lloyd Richman
  • D D
    dinielligoyo dinielligoyo
  • R B
    Robert Brown
  • Tony Stark
  • A C
    Adelina Chauchescu
bottom of page